MoerDuo Manually Switch Sampling Rate

Switch Sampling Rates with Ease

MoerDuo™ Auracast™ Transmitter · Firmware V3.7.1+

Enjoy faster, more intuitive audio control. With firmware V3.7.1 or later, you can switch the sampling rate directly on the device without using a computer tool.

MoerDuo manual sampling rate guide: switch to Auracast mode, click the Power button once, then press it again and hold. The purple LED flashes quickly 3 times for 24 kHz or stays on for 1–2 seconds for 48 kHz.

New Feature

Switch between 24 kHz and 48 kHz with a simple button operation to quickly adjust the device to your listening needs.

How to Switch

  1. Switch MoerDuo™ to Auracast™ mode.
  2. Click the Power button once and release it, then press the same button again and hold.
  3. Check the purple LED to confirm the selected sampling rate.

LED Feedback

The purple LED indicates the selected sampling rate:

24 kHz

Purple LED Flashes quickly 3 times

48 kHz

Purple LED Stays on for 1–2 seconds

Firmware Update Methods

You can update MoerDuo™ firmware in either of the following ways. Switch the device to the required mode before updating.

TX MODE

1. MoerLab Device Manager

Switch MoerDuo™ to TX (transmitter) mode, then use MoerLab Device Manager on your computer to update the firmware.

RX MODE

2. MoerLab Audio App

Switch MoerDuo™ to RX (receiver) mode, then use the MoerLab Audio App on your smartphone to update the firmware.