24
24 kHz Optimized
Recommended sampling rate for Auracast™ hearing aid use cases.
Auracast™ Hearing Aid Solutions
MoerLab® Auracast™ Hearing Aid Solutions
Connect Auracast™ to Hearing Aids
Broadcast clear, low-latency audio directly to Auracast™-ready hearing aids for TV listening, classrooms, churches, museums, guided tours, meetings, and public venues.
Why MoerLab
Designed for Auracast™ Hearing Aid Deployment
MoerLab transmitters help venues and home users create reliable Auracast™ broadcasts with simple setup, hearing-aid-friendly audio settings, and flexible installation options.
↕
No PC Tool Required
With updated firmware, supported devices can switch sampling rate directly on the device.
🔒
PIN Protected
Optional PIN support helps protect private broadcasts in classrooms, meetings, and venues.
⚡
Low Latency
Clear and synchronized listening for speech, TV audio, presentations, and live events.
Product Solutions
Choose the Right Auracast™ Transmitter
TV hearMore™
Ideal for TV, home entertainment, classrooms, churches, and fixed venue installations. Stream TV or venue audio directly to Auracast™ hearing aids while keeping speakers active.
- TV and venue audio broadcasting
- Multiple input options
- Suitable for shared listening environments
MoerLink™
A compact USB Auracast™ transmitter for PCs, classrooms, online meetings, and small venues. Pre-configured at 24 kHz for hearing-aid-optimized plug-and-play use.
- USB plug-and-play
- 24 kHz hearing aid optimized
- Great for PCs and classroom setups
SoundLinker™ / MoerDuo™
Portable transmitters and flexible transceivers for guided tours, temporary events, mobile broadcasting, and assistive listening demonstrations.
- Portable broadcasting
- Tour and event use cases
- Flexible TX/RX deployment
Firmware Update
Switch Between 24 kHz and 48 kHz Directly
A faster and more intuitive way to control your audio. With the device's updated firmware, you can now adjust the sampling rate directly on the device — no PC Tool required.
Use 24 kHz for Auracast™ hearing aid applications, and 48 kHz for general audio broadcasting where higher sampling rate is preferred.
Compatibility
Tested Compatible Hearing Aids
Tested compatible hearing aids include Oticon Intent™, Starkey Edge AI™, ReSound™ Nexia™, and Jabra™ Enhance Pro 20.
Other Auracast™-enabled hearing aids may also be compatible. Performance may vary depending on the hearing aid model, manufacturer settings, and firmware version.
Quick Setup
Start Broadcasting in Four Steps
01
Power On
Connect your transmitter to the audio source and power it on.
02
Set Sampling Rate
Select 24 kHz for Auracast™ hearing aid use cases.
03
Enable PIN
Configure a PIN code if private or secured broadcasting is required.
04
Connect
Select the Auracast™ stream from the hearing aid app or compatible receiver.
Video Center
Video Demonstrations
Real-world Auracast™ hearing aid deployment scenarios.
FAQ
Auracast™ Hearing Aid Questions
Which hearing aids are compatible with MoerLab® transmitters?
Tested compatible hearing aids include Oticon Intent™, Starkey Edge AI™, ReSound™ Nexia™, and Jabra™ Enhance Pro 20. Other Auracast™-enabled hearing aids may also be compatible depending on model and firmware version.
Why does MoerLab recommend 24 kHz for hearing aids?
24 kHz is recommended for Auracast™ hearing aid applications because it is optimized for speech-focused listening scenarios and hearing aid compatibility.
Can I change the sampling rate without a PC Tool?
Yes. With updated firmware on supported MoerLab devices, you can adjust the sampling rate directly on the device without using the PC Tool.
Do I still need the MoerLab PC Tool?
The PC Tool may still be useful for advanced configuration, but supported firmware allows faster on-device sampling rate switching for daily use.
Is PIN security supported?
Yes. PIN-protected broadcasting can be configured for supported products when private listening or secured venue broadcasting is required.
Which transmitter should I choose?
Choose TV hearMore™ for TV and fixed installations, MoerLink™ for USB PC or classroom use, SoundLinker™ for portable broadcasting, and MoerDuo™ for flexible TX/RX applications.
Need help?
Need help choosing the right Auracast™ transmitter?
Contact MoerLab to build the right assistive listening solution for your home, classroom, venue, event, or public space.